The MB-HDS320 shaft screening bucket is the most advanced and adaptable solution in the MB Crusher range for large excavators and loaders. Built for excavators from 18 – 25 tons and loaders from 11 – 14 tons, this unit is engineered to crush and separate a wide range of materials directly on-site—without needing multiple tools.
With an impressive 1.35 m³ load capacity, the MB-HDS320 can handle excavation waste, asphalt, organic matter, bark, plastics, and even coal. The true innovation lies in the rotor-change system—rotating shafts can be swapped out on site in just minutes by a single operator, improving versatility and efficiency.
Built with safety, simplicity, and productivity in mind, this screener bucket minimizes downtime and transforms waste into reusable, profitable material. MB’s centralized greasing system and modular build make this one of the most profitable attachments in the field.
Specification | Value (Metric) |
---|---|
Recommended Excavator | 18,000 – 25,000 kg |
Recommended Loader | 11,000 – 14,000 kg |
Load Capacity | 1.35 m³ |
Hydraulic Pressure | 250 – 300 bar |
Back Pressure | < 20 bar |
Oil Flow Rate | 120 – 160 L/min |
Hydraulic Requirement Note | Hydraulic flow and pressure must meet required parameters. |
The MB-HDS320 shaft screening bucket is the most advanced and adaptable solution in the MB Crusher range for large excavators and loaders. Built for excavators from 18 – 25 tons and loaders from 11 – 14 tons, this unit is engineered to crush and separate a wide range of materials directly on-site—without needing multiple tools.
With an impressive 1.35 m³ load capacity, the MB-HDS320 can handle excavation waste, asphalt, organic matter, bark, plastics, and even coal. The true innovation lies in the rotor-change system—rotating shafts can be swapped out on site in just minutes by a single operator, improving versatility and efficiency.
Built with safety, simplicity, and productivity in mind, this screener bucket minimizes downtime and transforms waste into reusable, profitable material. MB’s centralized greasing system and modular build make this one of the most profitable attachments in the field.
Specification | Value (Metric) |
---|---|
Recommended Excavator | 18,000 – 25,000 kg |
Recommended Loader | 11,000 – 14,000 kg |
Load Capacity | 1.35 m³ |
Hydraulic Pressure | 250 – 300 bar |
Back Pressure | < 20 bar |
Oil Flow Rate | 120 – 160 L/min |
Hydraulic Requirement Note | Hydraulic flow and pressure must meet required parameters. |
5 star | 0% | |
4 star | 0% | |
3 star | 0% | |
2 star | 0% | |
1 star | 0% |
Sorry, no reviews match your current selections
© Copyright 2024, MCMCO